Access Point Temporarily Full: What it Means & How to Fix

Alleviate your router’s pressure points with these tricks

4 min. read

Updated onSeptember 25, 2024

updated onSeptember 25, 2024

Share this article

This article is translated in

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

If you’re having trouble connecting to a wireless access point, or it seems like the signal is weak or, the access point may be temporarily full. This can happen if the AP is overloaded with too many clients or taking too long to process packets from existing clients.

Here’s how to fix it:

How do I fix the router access point temporarily full error?

Before you dive into troubleshooting, try the following: disconnect unnecessary devices from the router, check with your ISP about your modem’s IP, power cycle the router, and update its firmware while plugging in via Ethernet.

1. Raise the device limit

If too many devices are trying to access the same network, it’s easy for your access point to reach its capacity quickly. This is most common with older routers and modems because they typically only support a handful of clients.

However, be cautious: adding more devices on a weak connection can severely degrade your Wi-Fi performance, leading toconnection issues.

2. Change your router’s channel

New devices may flock to the only available channel if it is saturated and can’t accommodate more clients. This can easily cause an overlap and create achannel conflict.

3. Change your network band

4. Set a static IP address

When you configure devices on your network to use specific IP addresses, they can always connect even in times of unexpected power outages.

5. Increase security

If you’re using an open network, the best way to block all outside traffic is to prevent clients from accessing the Internet. This can be done by adding a password, MAC filtering, and/or enabling encryption.

If that’s not enough, consider installing a firewall to block unauthorized access attempts.

The lifespan of a wireless access point varies based on usage, manufacturer quality, and environment. High-quality APs can last up to 5 years, while lower-quality models may only last a year or less.

If your access point is reaching the end of its life, you might experience connection issues. If that’s the case, consider getting new ones.

And if the access points are proving to be a hard nut to crack, consider aWi-Fi mesh. Nevertheless, for problems that aren’t related to the age of your hardware, the troubleshooting steps above should help you fix it.

Have you managed to fix this error? Let us know which solution worked best for you in the comment section below.

Access Point Temporarily Full: What it Means & How to Fix#

How do I fix the router access point temporarily full error?#

1. Raise the device limit#

2. Change your router’s channel#

3. Change your network band#

4. Set a static IP address#

5. Increase security#