How to Fix Chassis Intruded Fatal Error System Halted

Everything you need to get rid of this frustrating error message

3 min. read

Updated onSeptember 24, 2024

updated onSeptember 24, 2024

Share this article

This article is translated in

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

TheChassis intruded FatalError… System Haltederror messageis usually ahardwareissue. The message shows when the chassis or the cabinet in which the motherboard is fitted gets open somehow.

In essence, the error message can be seen as a security mechanism provided by some OEMs. Knowing this, we will show you how to get rid of the error message in the ensuing sections of this guide.

How to fix the Chassis intruder fatal error?

1. Put the cabinet back in place

This often is the easiest and the most logical solution to the issue. However, before physically putting it in the cabinet, you must put the jumper back on the pin-marked chassis signal on the motherboard.

In some cases, there might be a switch mechanism that gets engaged once the cabinet is properly locked in its slot.

2. Clear CMOS

The above represents the battery method to clear CMOS, and the same can also be achieved using the jumper method.

However, it can be a bit more tricky and is best done under the supervision of ahardwarespecialist if you aren’t too comfortable with the motherboard and its components.

3. Disable Chassis intrusion

The above steps should be all needed to take care of theChassis intruded! Fatal Error… System Haltederror message. Some of the steps mentioned above requirehardwareskills, so you might want to contact a professional.

If you are facing afatal system error on Windows 10, check our detailed guide to fix it quickly.

Feel free to let us know the solution that helped you fix this issue in the comments below.

Chassis intrusion means that the chassis or the cabinet in which your motherboard is fitted is opened. This error seeks to warn the user if the cabinet is breached.

The mechanism uses a connector on the motherboard to detect if the chassis is removed/ replaced.

That said, the error message can also appear if there are issues with theBIOSor CMOS. However, notwithstanding how intricate the error might seem, it can be resolved easily and quickly with minimum effort.

How to Fix Chassis Intruded Fatal Error System Halted#

How to fix the Chassis intruder fatal error?#

1. Put the cabinet back in place#

2. Clear CMOS#

3. Disable Chassis intrusion#

How to Fix Chassis Intruded Fatal Error System Halted

How to fix the Chassis intruder fatal error?

1. Put the cabinet back in place

2. Clear CMOS

3. Disable Chassis intrusion